Optional accessories
- spindle : 20000/30000rpm.
- auto. Chip conveyer.
- oil separation.
Specification
| Item/model | unit | SD10855th | |
|---|---|---|---|
| Control | CNC control | INTEK 675 | |
| Spindle motor | KW | 11KW(15KW,18KW0 | |
| Motor of three axis (x.y.z.) | KW | 3.5/3.5*2/3.5with Break | |
| Taper of spindle | BT40(HSK-A63,HSK-E50) | ||
| Spindle | Spindle drive | Built-in | |
| Spindle speed | RPM | 15000(2000,30000) | |
| Table size | mm | 1100*900 | |
| Table | T-slot(Width*No.*Pitch) | mm | T16 |
| Table load | KG | 1500 | |
| Travels | Travel for X*Y*Z axis | mm | 1000*800*500 |
| Distance from Spindle nose to work table | mm | 150-650 | |
| Center of spindle to z-axis slide-way | mm | 310 | |
| Feed rates | Rapid feed rate | mm/min | 20000 |
| Circle cutting accuracy | mm | 0.01 | |
| Cutting feed rate | mm/min | 20000 | |
| Min. resolution | mm | 0.001 | |
| Tool | Max. tool length (Diameter) | mm | 200(32) |
| Max. tool weight | KG | 4 | |
| ATC tool magazine (arm–less type) | T | 20(24option) | |
| Power sources | Spindle coolant-power/oil capacity | Watt /Liter | 750/8 |
| Auto. Lubrication system –power/ oil capacity | Watt/Liter | 220/2 | |
| Heating system / hose | watt | 40*2 | |
| Capacity of Cutting fluid box | L | 180 | |
| Compressed air supply | Kg/cm2 | 6 | |
| Power | kW | 25 | |
| Weight | Machine net weight | KG | 9300 |
| Machine gross weight | KG | 9950 | |
| Machine size | Packing size( L/W/H) | cm | 3215*2280*2500 |
| Floor Space of machine(L/W/H) ) | cm | 3330*4110*3020 | |
| Item/model | unit | PAR-350 | ||
|---|---|---|---|---|
| Table Top Diameter | Ø350 | |||
| Overall Height in Horizontal | mm | 470 | ||
| Center Height in Vertical | mm | 300 | ||
| Overall Height in Table | mm | 300 | ||
| Overall Length | mm | 1121 | ||
| Spindle Hole Diameter | mm | Ø50H7 | ||
| Width of T-Slot | mm | 12H7 | ||
| Width of Guide Slot | mm | 18H7 | ||
| Speed Reduction Speeed | 1:90 | 1:120 | ||
| Max. Rotation Speed | Motor 2000min-1 | 22.2 | 16.7 | |
| Min. Indexing Unit | degree | 0.001 | ||
| Tilting Angle Range | degree | +30o~-120o | ||
| Indexing Accuracy | arc/sec | 15 | 45 | |
| Repeatiability | arc/sec | ±3 | ±4 | |
| Broke Torque | Hydraulic | 35kg/cm2 | 112 | 153 |
| Magwetic Valve | AC110V DC24V | |||
| Brakeing | Hydraulic | |||
| Max. Loading | Horzontd | kg | 200 | |
| Tilt(90kg) | kg | 100 | ||
| Permissible Cutting Force | Kg-m | 30 | ||
| Net Weight | Kg | 550 | ||
Standard accessories
- built –in spindle.
- full cover.
- blowing device for spindle.
- spindle coolant system.
- auto. Lubrication system.
- cutting oil coolant device.
- water Gun、side–way air blower，work lamp.
- hand-on type operation box / 26PIN hand wheel.
- RS232 9PIN INTERFACE.
