pecification
| MODEL | Unit | SV-11H | |
|---|---|---|---|
| Controller | Intek /Mitsubishi/Fanuc | ||
| Motor | x-axis motor | kw | 3(3.5 opt.) |
| Y-axis motor | kw | 3(3.5 opt.) | |
| z-axis motor | kw | 3.5 | |
| Spindle | Spindle Motor (Con./30 min) | Kw/HP | 7.5/11(11/15) |
| Spindle taper | BT40 | ||
| Spindle type | Direct drive /built in | ||
| Spindle speed | 10000(12000,15000,30000Opt.) | ||
| Table | Table size | mm | 1250*600 |
| T-slot (Width*No.*Pitch) | mm | 18*5*100 | |
| Max. work piece weight | kg | 1000 | |
| Travel | X/Y/Z axis Travel | mm | 1100/800/600 |
| Spindle Nose to work distance. Min – Max. | mm | 120-720 | |
| Spindle Center to Column surface distance | mm | 680 | |
| Linear Guide type X/Y/Z | mm | 35/45/45(Roller type) | |
| Cooling/ Lubrication | Oil / Grease | ||
| Feed Rate |
Rapid traverse x/y/z | mm/min | 30/30/24 |
| Cutting feed rate | Mm/min | 1-10000 | |
| Min. Resolution | mm | 0.001 | |
| Tool | Max. tool Length | mm | 300 |
| Max. Tool diameter | mm | ∅77(127) | |
| Max. tool weight | Kg | 7 | |
| Tool selection | Random | ||
| Tool magazine | capacity | 24/30(Opt.) | |
| Other | Coolant tank capacity | L | 400 |
| Pneumatic pressure | Kg/cm | 6 | |
| Coolant motor power | HP | 3/4 | |
| Thru spindle coolant | 290Psi(20bar) | ||
| Machine Size | Machine net weight | kg | 5500 |
| Floor space of machine | mm | 3650*2500 | |
| Power | KVA | 30 | |
*Specifications are subject to change without prior notice
STANDARD
- Heat exchanger.
- Removable manual pulse generator(MPG).
- Enclosed splash guard.
- RS-232 interface.
- Automatic power off.
- Screw type chip conveyer.
- Automatic lubrication equipment.
- Work light.
- Tool kit.
- Alarm light.
- Swing type operator panel.
- Spindle oil cooler.
- Bed coolant wash.
- Rigid tapping.
- Wash gun / Air gun.
OPTIONS
- Flat type chip conveyer and chip bin.
- 4th axis control and rotary table.
- Coolant through spindle with filter.
- Automatic tool length measuring device.
- Automatic workpiece measuring device.
- Linear scale.
- 30 tools cam type ATC.
- 12,000 rpm / 15,000 rpm direct drive spindle.
- 15,000 rpm built-in spindle.
