Specification
| MODEL | Unit | SV12H | ||
|---|---|---|---|---|
| MODEL | CONTROLLER | INTEK-M470/Mitsubishi M70A M720 | INTEK-M675(5 Axis) | |
| MOTORS | X-axismotors | KW | 3.5 | |
| Y-axis motors | KW | 3.5 | ||
| Z-axis motors | KW | 3.5 | ||
| SPINDLE | Spindle motor (conti./ 30 min. ) | KW / HP | 11 / 15(15/ 20) Higt / Low Winding Switching |
|
| Spindle Taper | CAT-40 | |||
| Spindle Type | Direct drive | |||
| Spindle speed | 8000/(10000,12000,15000 opt.) | |||
| TABLE | Table Size | mm | 1450 x 600 | |
| T-Slots ( Width*No.*Pitch ) | mm | 18 x 5 x 100 | ||
| Max. work piece weight | kgs | 1000 | ||
| TRAVEL | X / Y / Z -Axis Travel | mm | 1250/600/600 | |
| Spindle Nose To Word Table Distance, Min.-Max. | mm | 120 ~ 720 | ||
| Spindle Center to Column Surface Distance | mm | 680 | ||
| Linear Guideway Type ( X,/ Y / Z ) | mm | 34/45/45 (Roller type) | ||
| Cooling / Lubrication | Oil | |||
| FEED RATE | Rapid traverse X / Y / Z | m / min | 24 / 24 / 24 | |
| Cutting Feed Rate | mm / min | 1-10000 | ||
| Min.Resolution | mm | 0.001 | ||
| TOOL | Max. Tool Length | mm | 300 | |
| Max. Tool Diameter | mm | Ø 77 ( 127 opt. ) | ||
| Max. Tool Weight | kg | 7 | ||
| Tool Selection | Random | |||
| Tool Magazine Arm type | Capacity | 30 | ||
| OTHER | Coolant Tank Capacity | L | 400 | |
| Pneumatic Pressure | kg / cm² | 6 | ||
| Coolant Motors Power | HP | 3/4 | ||
| Thru Spindle Coolant | 290 Psi (20 Bar) | |||
| MACHINE SIZE | Machine Net Weight | kg | 8300 | |
| Floor Space of Machine (L*W) | mm | 4410 x 2432 | ||
| Power | KVA | 30 | ||
*Specifications are subject to change without prior notice
STANDARD
- Heat exchanger.
- Removable manual pulse generator(MPG).
- Enclosed splash guard.
- RS-232 interface.
- Automatic power off.
- Screw type chip conveyer.
- Automatic lubrication equipment.
- Work light.
- Tool kit.
- Alarm light.
- Swing type operator panel.
- Spindle oil cooler.
- Bed coolant wash.
- Rigid tapping.
- Wash gun / Air gun.
OPTIONS
- Flat type chip conveyer and chip bin.
- 4th axis control and rotary table.
- Coolant through spindle with filter.
- Automatic tool length measuring device.
- Automatic workpiece measuring device.
- Linear scale.
- 30 tools cam type ATC.
- 12,000 rpm / 15,000 rpm direct drive spindle.
- 15,000 rpm built-in spindle.
